Updated November 2026

Walking backwards on an incline treadmill for knees can reduce the forward impact on your joints while still working your quads, hamstrings and calves. This guide explains how to set up the treadmill, choose a safe incline and speed, and progress slowly so your knees stay comfortable. Because knee pain has many causes, check with a doctor or physical therapist before you add any new exercise.

Why Backward Walking Can Be Easier on Your Knees

When you walk forward, your heel strikes the belt and sends force up through the knee with each step. Walking backward changes the landing pattern: most people land on the ball of the foot with a softer, more controlled step. Combined with a modest incline, this shifts more work to the hips and quads and often feels gentler on the front of the knee. Owners often report that the movement feels less jarring, but results vary, so start conservatively.

Shopping for one? See our guide: 6 Best Folding Treadmills with Auto Incline for Home (2026).

How to Set Up Your Treadmill for Backward Walking

  1. Confirm the deck has enough length. Most walking treadmills need at least 5 to 6 feet of clear space behind the console for backward movement.
  2. Stand at the side of the belt and start the treadmill at the lowest speed, usually 0.5 to 1.0 mph.
  3. Use the safety clip attached to your clothing. Keep it on for every session.
  4. Step onto the moving belt from the side, then position your feet on the sides of the deck, not the center.
  5. Set the incline to 1 percent or 2 percent for your first session. Check the manufacturer’s manual for the maximum incline your model supports.

Choosing a Safe Speed and Incline

Start slow. Backward walking requires more balance and coordination than forward walking, so a speed of 1.0 to 1.5 mph is a reasonable beginning range. Keep the incline low at first. A 2 to 4 percent grade is enough to engage the legs without putting strain on the knee joint. Increase only one variable at a time, either speed or incline, and only after two or three comfortable sessions.

Week Speed Incline Session Length
1 1.0 mph 1% 5 minutes
2 1.0 to 1.2 mph 2% 8 minutes
3 1.2 to 1.5 mph 3% 10 minutes
4 1.5 mph 4% 15 minutes

Step-by-Step Backward Walking Routine

Warm up and stay upright

Walk forward at 1.5 mph on a flat setting for three minutes. Then switch the belt direction on your treadmill if your model supports reverse operation, or step onto the belt facing the console. Keep your chest up and your gaze over your shoulder, using the handrails only for light balance support.

Keep the stride short and controlled

Take small steps and land softly on the balls of your feet. Avoid reaching back with the leg, since overextension can stress the knee. Keep your knees slightly soft rather than locked.

Cool down

Return to forward walking at a slow pace for three to five minutes, then stop the belt and step off to the side.

Common Mistakes to Avoid

  • Jumping to a high incline on day one, which can load the knee more than expected.
  • Looking down at your feet, which pulls you off balance on a moving belt.
  • Gripping the handrails tightly, which changes your posture and weight distribution.
  • Continuing through sharp, pinching or swelling pain. Stop and rest if this happens.
  • Skipping the safety clip, which is the most important protection against falls.

Supportive cross-training shoes with a firm heel counter help keep your foot stable on the belt. View on Amazon

A knee sleeve can offer light compression during longer sessions, though it does not replace proper form. View on Amazon

A treadmill mat under the unit can help reduce vibration noise in rooms above or beside living spaces. View on Amazon

FAQ

Is walking backwards on an incline treadmill safe for bad knees?

For many people it is a gentler option, but it depends on the cause of the knee problem. Ask a doctor or physical therapist before starting, especially after surgery or an injury.

What incline should I use when walking backwards?

Begin at 1 to 2 percent and increase slowly to around 4 percent as your balance and comfort improve. Stay below the maximum listed in your owner’s manual.

How long should a backward walking session last?

Start with five minutes and build to 15 to 20 minutes over several weeks. Stop if your knee becomes painful, swollen or unstable.

Conclusion

Walking backwards on an incline treadmill can be a low-impact way to build leg strength when you start slowly and keep the setup simple. Use a low speed and incline, keep the safety clip on, and progress only when your knees feel comfortable. If pain persists, consult a qualified health professional before continuing.

Emily Parker

About Emily Parker

Emily Parker is part of our editorial team and reviews and edits our treadmills & walking pads guides, checking product details against manufacturer specifications and owner feedback.