Updated November 2026

The nordictrack treadmill 40 incline setting is the top end of the incline scale on NordicTrack models that offer it, and it lets you simulate a steep uphill climb. This guide explains what the number means, how to reach it safely, and how to decide whether you should train at that grade. Along the way, you’ll see how the number relates to the actual slope of the deck.

What the 40 Incline Number Means

On most NordicTrack treadmills, the incline display is a scale rather than a direct percentage. A setting of 40 typically corresponds to the maximum grade the machine can reach, and manufacturers specify that maximum differently across models. Check your model’s manual or the specification page on the NordicTrack website for the exact maximum grade. Do not assume that 40 on your display equals a 40 percent grade.

Shopping for one? See our guide: 6 Best Folding Treadmills with Auto Incline for Home (2026).

How to Reach and Hold a 40 Incline Setting

Before you raise the deck to its top setting, confirm that the machine is level and that the walking belt is centered and properly tensioned. A belt that drifts or sits loose can cause the deck to feel uneven at steep grades.

  1. Stand on the side rails and start the belt at a slow walking speed, around 1.0 to 2.0 miles per hour.
  2. Use the incline buttons or the console controls to raise the deck one step at a time.
  3. Pause at intermediate settings to confirm the belt tracks straight and the motor sounds steady.
  4. Once you reach 40, keep your speed low until you are comfortable with your footing.
  5. Step back onto the side rails to lower the incline before you slow or stop the belt.

Choosing Speed and Incline for a 40 Setting

A steep grade multiplies the load on your legs, hips and calves, so speed should drop as incline rises. Many people who use the top settings walk well below their flat-ground pace. Start with short intervals of one to three minutes, then build duration as your stride feels stable.

Goal Suggested starting speed Session length
First time at high incline 1.0 to 1.5 mph 1 to 3 minutes
Steady hill practice 2.0 to 2.5 mph 5 to 10 minutes
Strength-focused intervals 1.5 to 2.0 mph Short bursts with rest

For more on matching grade to your goals, see What Incline Should I Run on a Treadmill? A Practical Guide and Treadmill Speed and Incline for Fat Loss: A Practical Starting Guide.

Safety Checks Before You Use Steep Grades

Steep inclines change your balance and gait. Keep the safety clip attached, hold the handrails when you change settings, and never reach for the console while the belt is moving at a steep grade. If the incline motor stalls, hums or drifts, stop using the top settings and address the problem first. For motor issues, see NordicTrack Treadmill Incline Motor Repair: Step-by-Step Fixes (2026).

Supportive footwear helps with the forward lean that steep grades demand. A treadmill mat can protect floors and keep the machine stable on uneven ground.

  • Running shoes with a firm heel counter help control foot position on steep grades. View on Amazon
  • A rubber equipment mat under the treadmill absorbs vibration and keeps the base from shifting. View on Amazon

Common Mistakes

  • Raising the incline to 40 before checking that the belt is centered and tensioned.
  • Keeping the same speed you use on flat ground, which often leads to a loss of balance.
  • Gripping the handrails tightly, which shifts your posture and strains your shoulders.
  • Ignoring unusual motor noise or jerky movement at steep settings.
  • Training at the top setting every session instead of building up gradually.

FAQ

Is 40 incline the same as a 40 percent grade?

Not necessarily. Incline scales vary by model, so confirm the actual maximum grade in your NordicTrack manual or on the manufacturer’s specification page.

What speed should I use at 40 incline?

Start slowly, typically between 1.0 and 2.0 miles per hour, and increase only when your footing feels secure.

Should I use a steep incline every day?

Most people benefit from varying their grade and building up gradually. If you have joint, heart or balance concerns, consult a doctor or physical therapist before using steep settings.

Conclusion

The 40 setting on a NordicTrack treadmill is the top of its incline range, and it works best when you approach it gradually. Confirm your model’s actual grade, keep speeds low, and check the machine before each steep session. With those habits in place, the top settings can add useful challenge to your walks.

Caleb Morgan

About Caleb Morgan

Caleb Morgan is part of our editorial team and reviews and edits our treadmills & walking pads guides, checking product details against manufacturer specifications and owner feedback.