Updated November 2026
Shopping for a treadmill drive belt replacement kit usually starts with a worn or slipping belt and a machine that no longer runs smoothly. The right kit depends on the treadmill brand, the belt’s rib count and length, and whether the part is a true drive belt or a walking belt. The three picks below were compared on specification details, brand reputation for compatibility, and patterns owners commonly report, with fit and part-number matching weighted most heavily. Before ordering, confirm your model number and the belt’s dimensions.
Our top picks at a glance
- 1
TOP CHOICEBest overall1PC 255589 8PJ556 8-Rib Treadmill Drive BeltView on Amazon - 2
Best for Life Fitness motorsLife Fitness Main Motor Drive Belt 23"View on Amazon - 3
Best for NordicTrack T6.5 ownersWalking Belt for Nordic Track T6.5 SeriesView on Amazon
Our Top Picks
| Product | Best for | Key feature |
|---|---|---|
| 1PC 255589 8PJ556 8-Rib Treadmill Drive Belt | Owners of NordicTrack, ProForm, Reebok, Gold’s Gym and Epic treadmills | 8-rib drive belt matched to part numbers 255589 and 8PJ556 |
| Life Fitness Main Motor Drive Belt 23″ | Life Fitness T5.0 and T5.5 owners | 23-inch main motor drive belt listed for part numbers 3259501 and 325950 |
| Walking Belt for Nordic Track T6.5 Series | NordicTrack T6.5 Series owners | Quiet, non-slip running belt for model 250160, part 263241 |
1PC 255589 8PJ556 8-Rib Treadmill Drive Belt
1PC 255589 8PJ556 8-Rib Treadmill Drive Belt, Replacement Part for NordicTrack, ProForm, Reebok, Gold's Gym & Epic Treadmills
Best for: Owners of multi-brand drive belt replacements who need a specific 8-rib part
This belt suits people whose treadmill uses an 8-rib drive belt and who have confirmed a match to part numbers 255589 or 8PJ556. It is listed as a replacement for several common brands, which makes it a practical choice when the original part is no longer available. For another angle, check out 5 Best Power Steering Rack Seal Kits and Replacement Seals (2026).
Key specs
- Type: 8-rib treadmill drive belt
- Part numbers listed: 255589, 8PJ556
- Compatible brands named in listing: NordicTrack, ProForm, Reebok, Gold’s Gym, Epic
Pros
- Wide brand compatibility listing
- Specific part numbers make matching straightforward
- Single-piece replacement with no extra hardware required
Cons
- Fit depends entirely on matching the old belt’s rib count and length
- Installation still requires removing the motor cover and tensioning the belt
Bottom line: A strong first choice for owners who can confirm the 8-rib, 255589 or 8PJ556 match on their existing belt.
Life Fitness Main Motor Drive Belt 23″
Best for: Life Fitness owners who need a motor drive belt for T5.0 or T5.5 models
This option is aimed at Life Fitness owners whose treadmill is a T5.0 or T5.5 and whose current belt is the main motor drive belt. It is the right category only if the failed part is the motor-to-deck drive belt rather than the walking belt on the deck.
Key specs
- Type: main motor drive belt
- Length: 23 inches
- Part numbers listed: 3259501, 325950
- Models named: Life Fitness Works T5.0 and T5.5
Pros
- Part numbers are listed clearly for matching
- Specific to a named Life Fitness model line
- Single-purpose part with no ambiguity about use
Cons
- Narrow fit: not suited to other brands or models
- Owners sometimes confuse it with the walking belt, so the old part must be checked first
Bottom line: The logical pick for Life Fitness T5.0 and T5.5 owners who have confirmed their failed part is the motor drive belt.
Walking Belt for Nordic Track T6.5 Series
Walking Belt for Nordic Track T6.5 Series, Quiet Non-Slip Running Belt Replacement, Model 250160, Part 263241
Best for: NordicTrack T6.5 Series owners who need a quiet, non-slip walking belt
This is a walking belt rather than a drive belt, so it fits owners replacing the running surface on a T6.5 Series model. Confirm the model number 250160 and part 263241 before ordering.
Key specs
- Type: walking belt (running surface)
- Model listed: Nordic Track T6.5 Series, model 250160
- Part number listed: 263241
Pros
- Specific model and part-number match
- Marketed as quiet and non-slip, a common owner concern
- Clear use case for T6.5 owners
Cons
- Not a drive belt, so it will not fix motor-to-deck slipping
- Limited to one model series
Bottom line: Right for NordicTrack T6.5 owners whose problem is the walking belt surface, not the drive belt beneath it.
Buying Guide
Confirm belt type: drive belt or walking belt
A drive belt runs between the motor and the front roller, while a walking belt is the surface you run on. Many “replacement kits” are one or the other, and buying the wrong type wastes time. Check your treadmill’s manual or look at the belt’s location before ordering.
Good picks for this: 1PC 255589 8PJ556 8-Rib Treadmill Drive Belt, Walking Belt for Nordic Track T6.5 Series
Match part numbers and rib count
Drive belts are often identified by rib count and a part number printed on the old belt. A mismatch in rib count or length will cause slipping or premature wear. Measure the old belt or read its label before buying.
Good picks for this: 1PC 255589 8PJ556 8-Rib Treadmill Drive Belt, Life Fitness Main Motor Drive Belt 23″
Check the length and width
Belt length is usually given in inches. Measure the old belt’s circumference or length as instructed in your service manual, and compare it to the listing. A belt that is too long will not tension correctly; one that is too short may not fit at all.
Good picks for this: Life Fitness Main Motor Drive Belt 23″, 1PC 255589 8PJ556 8-Rib Treadmill Drive Belt
Consider your brand and model
Treadmill brands use different drive designs. A belt listed for one brand may fit several others, but compatibility claims should be verified against your model number. NordicTrack, ProForm and similar brands often share parts across lines, while Life Fitness uses its own part numbers.
Good picks for this: Walking Belt for Nordic Track T6.5 Series, 1PC 255589 8PJ556 8-Rib Treadmill Drive Belt
Review use frequency and durability expectations
Heavy-use treadmills wear belts faster. Owners commonly report that belts on frequently used machines need replacement sooner than those in light household use. If you run daily, prioritize a belt whose part number matches the original exactly, since OEM-equivalent fit tends to hold up better under sustained load.
Good picks for this: 1PC 255589 8PJ556 8-Rib Treadmill Drive Belt, Life Fitness Main Motor Drive Belt 23″
Plan for installation and tension
Most drive belt replacements require removing the motor cover, loosening the motor mount, and re-tensioning the belt. Plan time for this, and have basic hex keys and a straightedge available. Improper tension is a common cause of slipping after replacement. Consult your treadmill’s service manual or a qualified technician if you are unsure.
Good picks for this: Life Fitness Main Motor Drive Belt 23″, 1PC 255589 8PJ556 8-Rib Treadmill Drive Belt
Weigh DIY against professional service
Drive belt swaps are within reach for many owners, but if the motor or electronics are involved, a professional is safer. Unplug the treadmill before any work, and consult a qualified repair technician for electrical concerns.
Good picks for this: Walking Belt for Nordic Track T6.5 Series, Life Fitness Main Motor Drive Belt 23″
FAQ
What is the difference between a treadmill drive belt and a walking belt?
The drive belt connects the motor to the front roller and transfers power to the deck. The walking belt is the surface you step on. Replacing the wrong one will not fix the problem.
How do I find my treadmill’s drive belt part number?
Check the old belt for printed numbers, consult the owner’s manual, or look up your model number on the manufacturer’s parts list. Matching the number before ordering is the most reliable approach.
Can one drive belt fit multiple treadmill brands?
Some belts are listed as compatible with several brands, but fit depends on rib count, length and width. Verify the dimensions against your existing belt rather than relying on brand names alone.
Why does a new drive belt slip after installation?
The most common cause is incorrect tension. A belt that is too loose will slip, and one that is too tight can strain the motor bearings. Follow the tension procedure in your service manual.
Do I need special tools to replace a drive belt?
Most jobs require basic hex keys, a socket set, and sometimes a straightedge to check alignment. Specific tools vary by model, so review your manual before starting.
Should I replace the belt myself or hire a technician?
Many owners complete drive belt swaps at home with careful work. If you are uncomfortable working near the motor or any electrical component, a qualified repair technician is the safer choice.
Conclusion
For most owners, the 1PC 255589 8PJ556 8-Rib Treadmill Drive Belt offers the broadest compatibility, provided the rib count and part numbers match your existing belt. Life Fitness T5.0 and T5.5 owners should choose the Life Fitness Main Motor Drive Belt 23″, and NordicTrack T6.5 owners whose problem is the walking surface should consider the Walking Belt for Nordic Track T6.5 Series. In every case, confirm the belt type and dimensions before ordering, and tension the belt correctly after installation. For related troubleshooting, see Why Does a Treadmill Belt Slip? Tension vs Drive Belt Causes Compared and How Tight Should Treadmill Drive Belt Be? Check and Adjust It Right.
Sources
- Consumer safety guidance on home exercise equipment and recalls (cpsc.gov)
- Workplace and general guidance on safe handling of machinery and electrical equipment (osha.gov)
