Updated November 2026

No, you should not use WD-40 silicone on a treadmill belt. Most treadmill manufacturers specify a silicone-based lubricant made for treadmill decks, and WD-40 silicone spray is not formulated for the friction and heat a running belt produces. Using the wrong product can leave residue, attract dust and cause slipping.

Why WD-40 Silicone Is the Wrong Choice

WD-40 silicone spray is designed as a general-purpose release and protectant. It is not a treadmill-specific lubricant, and its carrier solvents evaporate quickly, which can leave a thin, sticky film behind. On a belt that is constantly rubbing against the deck, that film can collect dirt and grit, creating drag that the motor has to fight.

Shopping for one? See our guide: 7 Best Folding Treadmills with 20 Inch Wide Belt for Home (2026).

Owners often report that spray-on products also tend to overspray onto the motor cover, the rollers and the floor. Over time, that buildup can make the belt feel uneven or cause it to drift toward one side.

Factors That Affect Which Lubricant Is Safe

Before choosing any lubricant, check these details in your owner’s manual:

  • Lubricant type. Manufacturers usually specify a 100% silicone treadmill lubricant, sold in bottles with a built-in applicator tube.
  • Belt type. Some belts are self-lubricating or come pre-treated, and adding lubricant can void the warranty or cause buildup.
  • Deck wear. A worn deck with a dry, glossy look generally needs lubrication sooner than one that is well maintained.
  • Usage level. Frequent or heavy use, such as daily running, usually calls for more frequent checks.

How to Lubricate a Treadmill Belt Correctly

Follow the manufacturer’s schedule and use only the product it recommends. A general process looks like this:

  1. Unplug the treadmill and make sure the power switch is off.
  2. Use the manufacturer-specified silicone lubricant and apply it along the underside of the belt, following the applicator instructions.
  3. Apply a measured amount, usually only a few ounces for the whole belt, and spread it evenly from side to side.
  4. Plug the unit back in and run it at a slow speed for about 5 minutes so the lube distributes.
  5. Wipe away any excess from the frame and motor cover.

If the belt slips, pulls to one side or feels stiff after lubricating, stop using the treadmill and consult the manufacturer or a qualified technician. Lubrication problems can overlap with tension or alignment issues, and a professional can confirm the cause.

What We’d Use

A 100% silicone treadmill lubricant made for running belts is the most direct option. Look for one labeled for your treadmill brand or for general treadmill decks:
View on Amazon

If you own a folding or compact model, a bottle with a long applicator tube makes it easier to reach the underside of the belt without fully removing the cover:
View on Amazon

FAQ

Can I use WD-40 on my treadmill belt?

WD-40 is a general-purpose product and is not designed for treadmill belts. Stick with a silicone lubricant that your manufacturer recommends.

How often should I lubricate my treadmill belt?

Check your owner’s manual for the schedule. Many owners check every few months, and more often if they use the treadmill daily.

What happens if I use the wrong lubricant?

It can cause sticky buildup, dust collection and belt slipping. If you already applied the wrong product, clean the deck and belt as your manual describes and contact the manufacturer for guidance.

Caleb Morgan

About Caleb Morgan

Caleb Morgan is part of our editorial team and reviews and edits our treadmills & walking pads guides, checking product details against manufacturer specifications and owner feedback.