Updated November 2026

Finding the right walking belt for treadmill replacement comes down to one question: does it match your machine’s model number and deck size? A belt that fits the wrong frame will stretch unevenly, slip, or never seat properly on the rollers. This guide compares three replacement belts built for specific treadmill families. We based the selection on published compatibility data, the part and model numbers each listing names, brand reputation for drive-system matching, and patterns owners commonly describe about tracking, noise and grip. Nothing here comes from our own lab testing.

Our top picks at a glance

  1. 1Treadmill Walking Belt (Running Belt) Compatible with Horizon T-101 TreadmillTOP CHOICEBest overallTreadmill Walking Belt (Running Belt) Compatible with Horizon T-101 TreadmillView on Amazon
  2. 2Treadmill (Running Belt) Walking Belt Compatible with Proform Various TreadmillsBest for Proform ownersTreadmill (Running Belt) Walking Belt Compatible with Proform Various TreadmillsView on Amazon
  3. 3Walking Belt for NordicTrack T6.5 Series, Quiet Non-Slip Running Belt ReplacementBest for NordicTrack T6.5 ownersWalking Belt for NordicTrack T6.5 Series, Quiet Non-Slip Running Belt ReplacementView on Amazon

Our Top Picks

Quick Comparison

Product Best for Key feature
Treadmill Walking Belt (Running Belt) Compatible with Horizon T-101 Horizon owners with a listed model or part number Lists multiple Horizon part and model numbers for matching
Treadmill (Running Belt) Walking Belt Compatible with Proform Various Treadmills Proform owners with an older or mixed-model frame Broad Proform compatibility across several models
Walking Belt for NordicTrack T6.5 Series NordicTrack T6.5 Series owners Non-slip, quiet replacement built around model 250160 and part 263241

Treadmill Walking Belt (Running Belt) Compatible with Horizon T-101 Treadmill

Treadmill Walking Belt (Running Belt) Compatible with Horizon T-101 Treadmill,Part Number 1000303302,1000101285,Model Number TM621,TM684,TM659,TM734

Treadmill Walking Belt (Running Belt) Compatible with Horizon T-101 Treadmill,Part Number 1000303302,1000101285,Model Number TM621,TM684,TM659,TM734

View on Amazon

Best for: Best overall

This belt suits Horizon treadmill owners who can read a model or part number off the frame, deck or manual. Its listing names several Horizon part numbers (1000303302, 1000101285) and model numbers (TM621, TM684, TM659, TM734), which makes matching straightforward before you order.

Key specs

  • Designed as a running belt replacement for Horizon T-101 treadmills
  • Compatible part numbers: 1000303302 and 1000101285
  • Compatible model numbers: TM621, TM684, TM659, TM734

Pros

  • Multiple listed part and model numbers make compatibility checking easier
  • Specifically built for the Horizon T-101 family rather than a generic size
  • Straightforward replacement when the original belt is worn or slipping

Cons

  • Only useful if your treadmill matches one of the listed models or part numbers
  • Owners with other Horizon models should confirm the deck length before buying

Bottom line: Choose this if your Horizon treadmill matches a listed model or part number. Check the numbers on your own machine first.

View on Amazon

Treadmill (Running Belt) Walking Belt Compatible with Proform Various Treadmills

Treadmill (Running Belt) Walking Belt Compatible with Proform Various Treadmills

Treadmill (Running Belt) Walking Belt Compatible with Proform Various Treadmills

View on Amazon

Best for: Best for Proform owners

This belt targets Proform owners whose treadmill is not a single exact model, or who have an older unit and want a belt covering several Proform frames. Because compatibility is described more broadly, measure your deck and compare the listing against your model’s manual before ordering.

Key specs

  • Designed as a running belt replacement for various Proform treadmills
  • Broad compatibility across multiple Proform models

Pros

  • Useful for owners who cannot match one exact model number
  • Covers several Proform frames under one product listing
  • Gives a practical replacement path when the original belt wears out

Cons

  • Broad compatibility means you must verify length and width yourself
  • Less precise matching than a single-model belt

Bottom line: A sensible choice for Proform owners who need a wider compatibility range. Measure your belt before buying.

View on Amazon

Walking Belt for NordicTrack T6.5 Series, Quiet Non-Slip Running Belt Replacement

Walking Belt for Nordic Track T6.5 Series, Quiet Non-Slip Running Belt Replacement, Model 250160, Part 263241

Walking Belt for Nordic Track T6.5 Series, Quiet Non-Slip Running Belt Replacement, Model 250160, Part 263241

View on Amazon

Best for: Best for NordicTrack T6.5 owners

This belt is aimed at owners of the NordicTrack T6.5 Series who want a replacement matched to a named model and part number. The listing identifies model 250160 and part 263241, and describes the belt as quiet and non-slip.

Key specs

  • Built for the NordicTrack T6.5 Series
  • Listed model number: 250160
  • Listed part number: 263241

Pros

  • Clear model and part number for straightforward matching
  • Listing emphasizes quiet operation and grip, which owners often prioritize
  • Designed for a single series, reducing guesswork

Cons

  • Limited to the T6.5 Series; other NordicTrack models will not fit
  • Quiet and non-slip claims depend on proper installation and tension

Bottom line: The right pick for NordicTrack T6.5 owners who want a model-specific replacement with listed numbers.

View on Amazon

If you are not sure whether your belt is worn or the drive is at fault, our guide to Treadmill Walking Belt Replacement: A Step-by-Step Guide (2026) walks through the swap. For slipping symptoms, read Why Does My Treadmill Belt Slip When I Run? Tension Vs. Wear Compared before ordering a new belt.

Buying Guide

Model and part number matching

Start with the model number printed on the frame, console or owner’s manual, then compare it to the part numbers in the listing. A belt built for a different deck length or roller spacing will track poorly or wear unevenly. Manufacturers specify compatible model families for a reason, so treat those lists as the primary filter.

Good picks for this: Treadmill Walking Belt Compatible with Horizon T-101; Walking Belt for NordicTrack T6.5 Series

Belt length and width

Measure the existing belt’s length and width before ordering, and compare the figures to the listing. Length errors are the most common cause of belts that slip or sit off-center. Measure end to end on the running surface with the belt removed.

Good picks for this: Treadmill (Running Belt) Compatible with Proform Various Treadmills

Compatibility across multiple models

Some owners cannot find an exact model match and need a belt covering several frames. In that case, the broader listing is the practical option, but you should double-check dimensions against your deck rather than relying on the title alone.

Good picks for this: Treadmill (Running Belt) Compatible with Proform Various Treadmills

Grip and surface quality

Owners frequently describe slipping as the main reason for replacing a belt. Look for listings that mention non-slip surfaces, and remember that tension and drive-system condition also affect grip. A new belt on a loose or worn drive will still slip.

Good picks for this: Walking Belt for NordicTrack T6.5 Series

Noise and smooth operation

Quiet operation depends on a correctly tensioned belt that tracks centered on the rollers. Owners often report noise that disappears after proper alignment rather than after swapping parts alone. Choose a belt that matches your model, then check tension and alignment after installation.

Good picks for this: Walking Belt for NordicTrack T6.5 Series; Treadmill Walking Belt Compatible with Horizon T-101

Installation and tension

Most replacement belts need the deck lifted and the old belt removed, then tensioned to the manufacturer’s specification. Under-tensioned belts slip; over-tensioned belts strain the motor and bearings. Follow the owner’s manual for the exact procedure and tension setting for your model.

Good picks for this: Treadmill (Running Belt) Compatible with Proform Various Treadmills

Durability and care

A belt lasts longer when the deck is kept clean and the treadmill is used within its rated weight and duty cycle. Dust and debris under the belt accelerate wear. Check alignment periodically, and replace the belt when fraying, glazing or persistent slipping appears.

Good picks for this: Treadmill Walking Belt Compatible with Horizon T-101; Walking Belt for NordicTrack T6.5 Series

FAQ

How do I know which walking belt fits my treadmill?

Find the model number on your frame or manual, then check the compatibility section of the listing. Match the model or part number exactly where possible, and measure the existing belt’s length and width if the listing is broader.

Can one belt fit several treadmill brands?

Some belts are designed for a single brand family, while others cover several models within a brand. A belt from one brand is generally not interchangeable with another brand’s deck, so confirm compatibility before buying.

Why does my new belt still slip?

Slipping can come from insufficient tension, a worn drive belt, or a motor control issue rather than the belt itself. Check tension against the manual first. For a deeper diagnosis, see Why Does a Treadmill Belt Slip? Tension vs Drive Belt Causes Compared.

How do I know when to replace the belt?

Common signs include fraying edges, a glossy or glazed surface, uneven wear, and persistent slipping after adjustment. Our guide When to Change Treadmill Belt: Signs It's Time and What to Do lists the main indicators.

Is a belt noise always a sign of a bad belt?

Not always. Noise is often caused by misalignment, low tension or debris under the deck. Owners frequently report that noise reduces after correct alignment and cleaning, so check those first.

Do I need to lubricate a new walking belt?

Some treadmill decks call for lubrication and some do not. Follow the manufacturer’s instructions for your model, since using the wrong lubricant can damage the belt or deck.

Should I hire a technician to install the belt?

Many owners install belts successfully with basic tools, but a qualified technician can help if the motor, drive system or electronics are involved. Consult a professional if you are unsure about electrical safety or if the treadmill is still under warranty.

Conclusion

For Horizon T-101 owners with a matching model or part number, the first belt in this list is the most direct choice. Proform owners with mixed or older frames will find the second option more practical, provided they verify dimensions before ordering. NordicTrack T6.5 Series owners have a clear model-specific match in the third belt. In every case, confirm your model number, measure the existing belt, and check tension after installation, because the belt alone does not solve drive-system problems.

Sources

Emily Parker

About Emily Parker

Emily Parker is part of our editorial team and reviews and edits our treadmills & walking pads guides, checking product details against manufacturer specifications and owner feedback.