Updated November 2026

If your NordicTrack X24 incline treadmill won’t change incline, gets stuck, or shows the wrong grade, the cause is usually a calibration issue, a loose or obstructed incline mechanism, or a power or console fault. Start with a full power cycle and a check of the console’s incline readout before moving to deeper steps. Most issues can be resolved without tools.

Why the NordicTrack X24 Incline Stops Responding

The incline on a treadmill like the X24 is driven by a motor that raises or lowers the rear of the deck. The console sends the command, the motor moves a lift mechanism, and sensors report the position back. A break anywhere in that chain can make the incline appear frozen, slow, or inaccurate. Owners often report that the problem shows up after a move, after a long period of disuse, or after the treadmill was run on an unstable surface.

Shopping for one? See our guide: Nordictrack Treadmill Incline Motor Review: Strengths and Limitations.

Factors That Commonly Cause Incline Faults

Several factors account for most incline complaints:

  • Power supply: An outlet shared with a high-draw appliance or a surge protector with a weak connection can cause the incline motor to stall.
  • Obstructions: Debris, a loose cord, or an object under the deck can block the lift travel.
  • Calibration drift: If the displayed grade no longer matches the actual deck angle, the console may limit or misreport incline changes.
  • Floor level: An uneven floor can strain the lift and make the deck appear to move unevenly.
  • Software or console glitches: A stuck screen or unresponsive buttons often clear after a restart.

What to Do About It

Work through these steps in order, and stop if you see signs of physical damage or smell burning:

  1. Unplug the treadmill for at least 60 seconds, then plug it directly into a wall outlet, not a power strip.
  2. Clear the area around the rear of the deck and check for anything caught under the frame.
  3. Level the treadmill by adjusting the leveling feet so it rests firmly on the floor.
  4. Check the incline readout against the level you selected. If they differ, follow the manufacturer’s calibration procedure in your owner’s manual.
  5. Run a short test at a low incline and listen for grinding, clicking, or a motor that hums without moving.
  6. If the incline still does not respond, contact NordicTrack support and describe the exact symptom, including any error code shown.

Electrical and motor repairs carry real risk. If the problem involves wiring, the motor housing, or the lift mechanism, consult a qualified technician or the manufacturer before opening any covers.

What We’d Use

A sturdy equipment mat keeps the treadmill level on hard floors and reduces vibration that can strain the incline assembly: View on Amazon.

A dedicated surge protector rated for fitness equipment helps protect the motor and console from voltage spikes: View on Amazon.

FAQ

Can I fix the incline myself?

Basic steps like power cycling, clearing obstructions, and leveling are safe for most owners. Motor or wiring repairs should be handled by a qualified technician.

Why does the incline readout not match the actual slope?

This usually points to calibration drift. Your owner’s manual describes the calibration process, and the related guides on this site cover it step by step.

When should I stop using the treadmill?

Stop if the incline makes grinding or burning sounds, the deck jerks unexpectedly, or the treadmill shuts off during use. Continuing to run it can cause further damage and create a safety risk.

Caleb Morgan

About Caleb Morgan

Caleb Morgan is part of our editorial team and reviews and edits our treadmills & walking pads guides, checking product details against manufacturer specifications and owner feedback.