Updated November 2026

Most walking pads do not use lubricant oil in the way a motor does. The running belt slides over a flat deck, and that friction needs a silicone-based treadmill lubricant, not a general-purpose oil. Check your manual first, because some models ship with a lubricant-free belt and others specify a particular silicone product for the deck.

Why Walking Pad Lubricant Oil Matters

The belt rides on the deck, and the two surfaces create friction every time you step. Without enough lubrication, the belt drags, the motor works harder, and the belt edges and deck wear faster. Owners often notice a slight hesitation or a burning rubber smell when the belt has gone dry. Manufacturers generally specify lubrication as routine maintenance so the belt keeps tracking evenly and the motor isn’t strained.

Shopping for one? See our guide: 5 Best Walking Pads with Incline Models for Home Use (2026).

Factors That Decide What Your Walking Pad Needs

Several things determine whether you need lubricant and how much:

  • Belt material: Many walking pad belts are sealed or pre-lubricated, while others require periodic silicone treatment.
  • Usage level: Daily walkers wear through lubricant faster than occasional users. Heavier users and longer sessions also add friction.
  • Home conditions: Dust, pet hair and humidity collect under the belt and mix with lubricant into a gritty film.
  • Deck type: Some decks are designed to run without added lubricant, and applying the wrong product can damage the belt.

Using a petroleum-based oil, cooking oil or a generic household lubricant is a common mistake. These can soften the belt material, attract dust and void the warranty. Stick with the silicone product your manufacturer names.

How to Check and Apply Lubricant Safely

  1. Unplug the walking pad and let it sit until fully stopped.
  2. Lift the belt edge slightly and check the deck. If it looks dry or dusty, lubrication is due.
  3. Run a finger along the deck. A dry, chalky feel suggests the belt needs lubricant.
  4. Apply the silicone lubricant along the center of the deck, following the amount in your manual. Too much causes slipping and mess.
  5. Plug the unit in and run it at a slow speed for a few minutes to spread the lubricant evenly.
  6. Wipe away any excess with a dry cloth.

Inspect the belt every few weeks and lubricate on the schedule your manual recommends. If the belt slips, sounds rough or drifts to one side, stop using the unit and consult the manufacturer or a qualified repair technician before continuing.

What We’d Use

For walking pads that call for silicone treadmill lubricant, a dedicated silicone product made for treadmill decks is the most reliable choice. Check your manual for the specific type.

A silicone treadmill lubricant made for running decks, such as Super Lube Silicone Lubricant, is commonly used for this job. View on Amazon

If you want a treadmill-specific option, a product sold as treadmill belt lubricant is another practical choice. View on Amazon

FAQ

Can I use WD-40 on my walking pad?

No. WD-40 is a solvent and light oil that can attract dust and break down belt material. Use only the silicone lubricant your manufacturer recommends.

How often should I lubricate a walking pad belt?

Schedules vary by model and use. Check your manual, and inspect the deck regularly for dry or dusty areas. Heavy daily use usually calls for more frequent checks.

Is a walking pad with no lubricant needed a bad sign?

Not necessarily. Some belts are sealed and never need added lubricant. Confirm this in your owner’s manual before deciding whether maintenance is required.

Emily Parker

About Emily Parker

Emily Parker is part of our editorial team and reviews and edits our treadmills & walking pads guides, checking product details against manufacturer specifications and owner feedback.